LED surgical Shadowless lamp is more and more widely used in medical institutions. As necessary equipment for doctors to operate shadowless lamp, it is very important to master the correct use of shadowless lamp, which is also the guarantee of operation safety. As an important part of the LED shadowless lamp, the reflector surface should also be maintained and maintained at ordinary times. Today, we will briefly introduce the wiping method of the LED shadowless lamp reflector surface.
1. How to wipe the mirror surface of LED surgical shadowless lamp
The reflective mirror surface of the surgical shadowless lamp is made of silver, chrome, and aluminum film, which will gradually lose its luster after long-term use. Therefore, the wiping of the mirror surface of the surgical lamp is a knowledge, and its importance must not be ignored. First wipe off the dust on the mirror surface, and then wipe the mirror surface with a cotton ball dipped in concentrated ammonia water to remove the dirt attached to it. Then wipe off the dirt with an alcohol cotton ball, and then dry it with a cloth to restore the original brightness. Concentrated ammonia water is an alkaline solution. Ammonia is very active and can remove the dirt attached to the mirror surface, and ammonia is easy to escape, resulting in a drop in pH value and no damage to the mirror surface.
Although the wiping of the mirror surface of the surgical lamp is extraordinarily important, it is not difficult to wipe the mirror surface of the surgical lamp. As long as the above steps are followed, the reflective mirror surface of the surgical lamp can be wiped well. The use of the surgical shadowless lamp should be very careful. The surgical shadowless lamp is an important lighting device in surgery and must be handled with care.
It should be noted that frequent wiping of the mirror surface will easily wear the mirror surface and affect the service life of the mirror surface. Frequent wiping is not recommended. In addition, as an important operating room equipment, some other improper operations will also affect the normal operation of the LED operating light, such as using corrosive liquid to clean the surgical shadowless light, which will damage the surface of the light body; other objects are casually placed on the balance arm of the operating light. , which will affect the balance of the surgical light arm; frequent switching of the surgical light will adversely affect the surgical light source module and the bulb body. We should pay more attention to these points when using, so as to effectively prolong the service life of the equipment.
Post time: Mar-16-2022
