China LEDL260 CE Approved Mobile LED Surgical Examination Light manufacturers and suppliers

LEDL260 CE Approved Mobile LED Surgical Examination Light

Short Description:

LED260 examination light is available in three installation ways, mobile,ceiling and wall mounting.

LEDL260, this model name is refers to stand type examination light.

There are 20 OSRAM bulbs in total. This examination light is mixed white light and yellow light, providing up to 80,000 illuminance and a color temperature of about 4500K.

Send email to us

Product Detail

Product Tags

Introduction

LED260 examination light is available in three installation ways, mobile,ceiling and wall mounting.
LEDL260, this model name is refers to stand type examination light.
The examination light housing is made of new aluminum alloy material, which is easy to dissipate heat. Fully enclosed design, no screws exposed. There are 20 OSRAM bulbs in total. This examination light is mixed white light and yellow light, providing up to 80,000 illuminance and a color temperature of about 4500K. The handle can be disassembled and sterilized. But the spot size cannot be adjusted.

Apply to

■ Outpatient Room
■ Veterinarian Clinics
■ Examination rooms
■ Emergency rooms
■ Humanitarian Relief Organizations

Stand type examination Light can be used for ENT(Eyes, Nose, Throat), dental, gynecological, dermatological, medical cosmetic,vet outpatient examinations and minor surgeries.

In areas with frequent natural disasters and severely lack of infrastructure, this portable examination light can be used not only for basic inspections, but also for minor surgeries.

Feature

1. Mixed with White and Yellow Light

After yellow light and white light are mixed, the color temperature and color rendering index are significantly improved. Equipped with self developed lens, this stand type examination light can be used not only in daily inspections, but also in minor surgery.

2. Two Disinfection Handles

We provide two handles for users, one for use and the other for spare. It can be dissembled for disinfection.

3. Intuitive Control Panel

Classic three-point design, switch, brightness increases, brightness decreases. The illuminance of the stand type examination light is adjustable in ten levels.

4. Reasonable Structural Design

Multi-joint design, whether it is a pole or a base, it has been debugged before leaving the factory. You only need to connect to the power supply and fastened the connection parts with screws. No threading or debugging is required.

5. Battery Back-up System

Batteries are selected from well-known international brands, with sea and air transportation appraisal reports, safe and reliable. In case of power failure, it can support 4 hours of normal use

Mobile-Examination-Light-with-Battery- Back-up

Parameters:

Description	LEDL260 Stand type Examination Light
Illumination Intensity (lux)	40,000-80,000
Color Temperature (K)	4000±500
Color Rendering Index(Ra)	≥90
Heat to Light Ratio (mW/m²·lux)	<3.6
Illumination Depth (mm)	>500
Diameter of Light Spot (mm)	150
LED Quantities(pc)	20
LED Service Life(h)	>50,000